Keyless Access Control Module: Removal

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Remove the cover assembly - instrument panel LWR driver and the knee airbag module. < Ref. to REMOVAL , Knee Airbag Module.>
Release the lock and remove the fuse holder.

Fig 1: Locating Knee Airbag Module Of Cover Assembly - Instrument Panel LWR Driver
Courtesy of SUBARU OF AMERICA, INC.
Remove the relay & fuse box.
1. Disconnect the connector.
2. Remove the bolts and nuts, and remove the relay & fuse box.
  
  Fig 2: Locating Bolts And Nuts Of Relay/Fuse Box
  Courtesy of SUBARU OF AMERICA, INC.
Remove the keyless access control module.
CAUTION: Be careful to keep water and other foreign materials away from body integrated unit.
1. Disconnect the connector.
  
  Fig 3: Locating Connector Of Keyless Access Control Module
  Courtesy of SUBARU OF AMERICA, INC.
2. Release the claws, and pull out the keyless access control module from the bracket.
  
  Fig 4: Pulling Out Keyless Access Control Module From Bracket
  Courtesy of SUBARU OF AMERICA, INC.