Security System On/Off Setting

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: It can be set by «Security Alarm Setup» in unit customizing using Subaru Select Monitor. For detailed procedures, refer to "PC application help for Subaru Select Monitor".

Close all doors, trunk lid or rear gate, and sit down on the driver seat. Press the UNLOCK button of the keyless transmitter or access key.
Turn the ignition to ON.
Press the central door unlock switch and open the driver's door simultaneously. (Keep the central door unlock switch pressed down.)

When the condition in step 3) continues for 10 seconds, the system switches to a mode reverse to the current mode.

Setting	Horn activation	Meter display
ON → OFF	Twice	[AL_OF]
OFF → ON	Once	[AL_ON]