Steering Lock Control Module: Removal

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note.>
NOTE: For the 12 volt engine restart battery of HEV model, disconnect the ground terminal from 12V engine restart battery sensor.
Remove the column assembly - steering. < Ref. to REMOVAL , Steering Column.>
Remove the steering lock control module.
1. Secure the column assembly - steering in a vise.
2. Use the reverse tap or drill to remove the set bolt and remove the steering lock control module.
  CAUTION: Do not apply any impact to the set bolt by a chisel or punch.
  
  Fig 1: Locating Bolt Of Steering Lock Control Module
  Courtesy of SUBARU OF AMERICA, INC.