Auto Headlight Beam Leveler Control Module: Removal

WARNING: This page is about a different car, the 2015 Subaru XV Crosstrek and 2015 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Remove the knee airbag module. < Ref. to REMOVAL , Knee Airbag Module.>
Release the lock and remove the fuse holder.

Fig 1: Locating Headlight Beam Leveler Control Module
Courtesy of SUBARU OF AMERICA, INC.
Remove the relay & fuse box.
1. Disconnect the connector.
2. Remove the bolts and nuts, and remove the relay & fuse box.
  
  Fig 2: Locating Relay And Fuse Box Screws
  Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector of body integrated unit.

Fig 3: Locating Connector Of Body Integrated Unit
Courtesy of SUBARU OF AMERICA, INC.
Remove the Auto Headlight Beam Leveler Control Module.
1. Disconnect the connector.
2. Release the claws and pull out the Auto Headlight Beam Leveler Control Module.
  
  Fig 4: Removing Auto Headlight Beam Leveler Control Module
  Courtesy of SUBARU OF AMERICA, INC.