April 5, 2026: LEMON Manuals is launched! Read the announcement.

Remote Control Mirror Switch: Inspection

Disconnect the connector of the switch - door mirror.

Check the resistance between switch - door mirror terminals.

Preparation tool:

Circuit tester

Fig 1: Identifying Door Mirror Switch Connector Terminals

G08552197

Courtesy of SUBARU OF AMERICA, INC.

Changeover switch RH

Terminal No.	Inspection conditions	Standard
-	[OFF]	1 MΩ or more
1 - 12 9 - 7	UP	Less than 1 Ω
1 - 9 12 - 7	DOWN	Less than 1 Ω
1 - 11 12 - 7	LEFT	Less than 1 Ω
1 - 12 11 - 7	RIGHT	Less than 1 Ω

Changeover switch LH

Terminal No.	Inspection conditions	Standard
-	[OFF]	1 MΩ or more
1 - 14 8 - 7	UP	Less than 1 Ω
1 - 8 14 - 7	DOWN	Less than 1 Ω
1 - 10 14 - 7	LEFT	Less than 1 Ω
1 - 14 10 - 7	RIGHT	Less than 1 Ω

If the inspection result is not within the standard, replace the switch - door mirror.