LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> Outback 2.5i >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Rearview Camera System >> Removal >> Outback Model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Outback Model

  1. Disconnect the ground terminal from battery sensor. < Ref. to BATTERY , NOTE, Repair Contents. >
  2. Remove the trim panel - rear gate. < Ref. to REMOVAL , Rear Gate Trim. >
  3. Remove the garnish assembly - rear gate. < Ref. to REMOVAL , Rear Gate Garnish. >
  4. Remove the rearview camera assembly.
    CAUTION: Do not drop or apply any impact to the rearview camera because it is a precision equipment.
    1. Disconnect the connector.
    2. Release the claw and hook, and then remove the rearview camera assembly.
      Fig 1: Releasing Claw And Hook Of Rearview Camera Assembly - Outback Model
      G10272669Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals