Auto Headlight Beam Leveler Control Module: Installation
CAUTION:
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". < Ref. to
CAUTION
, General Description. >
- Install the auto headlight beam leveler CM.
- Install the relay & fuse box.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the fuse holder.
- Install the knee airbag module.
Tightening torque:
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the cover assembly - instrument panel LWR driver.
- Connect the battery ground terminal. < Ref. to
BATTERY
, NOTE, Note. >NOTE: For models other than STI model, connect the ground terminal to battery sensor.
- Perform initialization and reinitialization of the auto headlight beam leveler system. < Ref. to PROCEDURE , Auto Headlight Beam Leveler System. >