Keyless Access CM: Installation

CAUTION:

Registration of the immobilizer is necessary when a immobilizer-related control module has been replaced. For detailed operation procedure, refer to the "REGISTRATION MANUAL FOR IMMOBILIZER".
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". < Ref. to CAUTION , General Description. >

NOTE: Make sure that there are no differences from the contents of the current settings after installation. < Ref. to LIST , Read Current Data. >

Install the keyless access CM.
Install the relay & fuse box and fuse holder.
Tightening torque:

Relay & fuse box: 7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
Install the cover assembly - instrument panel LWR driver and the knee airbag module.
Connect the battery ground terminal. < Ref. to BATTERY , NOTE, Note. >
NOTE: For models other than STI model, connect the ground terminal to battery sensor.