Check Ignition Switch Illumination
DIAGNOSTIC PROCEDURE
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK IGNITION CIRCUIT. Check the ignition circuit. < Ref. to CHECK IGNITION SWITCH CIRCUIT , INSPECTION, Security System. > |
Is the switch circuit normal? | Go to step 2. | Repair or replace. |
| 2 CHECK DOOR SWITCH CIRCUIT. Inspect door switch circuit. < Ref. to CHECK DOOR SWITCH , INSPECTION, Keyless Entry System. > |
Is the switch circuit normal? | Go to step 3. | Repair or replace. |
| 3 CHECK FUSE. Remove and visually check fuse No. 14 (in the main fuse box). |
Is the fuse blown out? | Replace the fuse with a new part. | Go to step 4. |
4 CHECK HARNESS.
|
Is the voltage 10 V or more? | Go to step 5. | Check the harness for open or short circuits between the ignition switch illumination and fuse. |
5 CHECK IGNITION SWITCH ILLUMINATION CIRCUIT.
|
Is harness normal? | Go to step 6. | Check the harness for open circuits and shorts between the body integrated unit and ignition switch illumination. |
| 6 CHECK IGNITION SWITCH ILLUMINATION BULB. Apply battery voltage between terminals of the bulb. Terminals No. 2 (+) - No. 6 (-): |
Does the bulb illuminate? | Replace the body integrated unit. < Ref. to BODY INTEGRATED UNIT . > | Replace the immobilizer antenna. < Ref. to REMOVAL , Immobilizer Antenna. > |