Switch - power window sub rear

Disconnect the ground cable from battery. < Ref. to BATTERY , NOTE, Note. >
NOTE: For models other than STI model, disconnect the ground terminal from battery sensor.
Remove the trim panel - rear door. < Ref. to REAR DOOR , REMOVAL, Door Trim. >
Remove the panel - power window sub switch rear.
CAUTION: Be careful not to damage the trim panel - rear door with the panel - power window sub switch rear.
1. Insert a sheet of protective paper (a) between panel - power window sub switch rear and trim panel - rear door.
2. Remove the screws and disconnect the connector.
  
  Fig 1: Removing Power Window Sub Switch Rear
  Courtesy of SUBARU OF AMERICA, INC.
3. Release the claws, and then remove the panel - power window sub switch rear.
  
  Fig 2: Removing Power Window Sub Switch Rear Panel
  Courtesy of SUBARU OF AMERICA, INC.
4. Release the claws, and then remove the switch - power window sub rear.
  
  Fig 3: Identifying Switch Claws - Power Window Sub Rear
  Courtesy of SUBARU OF AMERICA, INC.