| Brake Maintenance Mode |
Used when inspecting and repairing parts related to rear brake. |
< Ref. to
BRAKE MAINTENANCE MODE
, OPERATION, Parking Brake System. > |
| Reading of parameter: ECM to SSM |
Read VDCCM parameter data. |
< Ref. to
VDCCM PARAMETER READING
, MAINTENANCE MODE, VDC Control Module and Hydraulic Control Unit (VDCCM&H/U). > |
| Writing of parameter: SSM to ECM |
Write the parameter data to the VDCCM. |
< Ref. to
VDCCM PARAMETER WRITING
, MAINTENANCE MODE, VDC Control Module and Hydraulic Control Unit (VDCCM&H/U). > |
| Select Parameter |
Select and register parameters in the VDCCM. |
< Ref. to
VDCCM PARAMETER SELECTION
, MAINTENANCE MODE, VDC Control Module and Hydraulic Control Unit (VDCCM&H/U). > |
| Confirm on parameter |
Parameters registered in the VDCCM are displayed. |
< Ref. to
VDCCM PARAMETER CHECK
, MAINTENANCE MODE, VDC Control Module and Hydraulic Control Unit (VDCCM&H/U). > |