Keyless Entry System: Notes

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

Check the keyless entry system operations as follows:

Fully open all the door windows.
Remove the key from ignition switch, and then close all doors.
Press the "LOCK" button momentarily on the keyless transmitter or the access key. Check that all the doors become locked, the buzzer sounds once, and the hazard lights flash once.

Courtesy of SUBARU OF AMERICA, INC.
Press the "UNLOCK" button momentarily on the keyless transmitter or the access key. Check that the driver's door is unlocked, the buzzer sounds twice, and the hazard lights flash twice.
Also, within 5 seconds, press the "UNLOCK" button momentarily. Check that all the doors are unlocked, the buzzer sounds twice, and the hazard lights flash twice.

Courtesy of SUBARU OF AMERICA, INC.
Check that the buzzer sounds twice, and the hazard lights flash twice, when the trunk open button is held down to unlock the trunk lid.

Courtesy of SUBARU OF AMERICA, INC.
Press the PANIC button on the keyless transmitter or the access key. Check that the panic mode (the horn keeps sounding) is initiated. Also, check that this condition continues for 30 seconds or until when any of the buttons on the keyless transmitter or the access key are pressed.

Courtesy of SUBARU OF AMERICA, INC.
Momentarily press the "LOCK" button on the access key or the access key with one of the doors open. Check that the buzzer sounds 5 times, and the hazard light flashes 5 times to notify the door not being fully closed. Then, close all doors. Check if all doors are locked and buzzer sounds once and the hazard light flashes once.