LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (General Information & Specifications) >> Repair Contents >> Note >> On The Car Wheel Balancing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On The Car Wheel Balancing

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Be sure to carry out the procedures after measuring the balance of each single tire. 
  • Set the vehicle so that the front and rear wheels are the same height. 
  • Make sure that the VDC is deactivated. 
  • Release the parking brake during measurement. 
  • Rotate each wheel by hands, and make sure it rotates without dragging. 
  • Do not operate the clutch quickly and do not accelerate or decelerate suddenly during work. 
  • When an error is indicated during engine drive, do not use the motor drive together. 
  1. Jack up the non-measuring side (front wheels or rear wheels) and set the rigid racks.
  2. Set the pickup stands to two wheels of the measuring side (front wheels or rear wheels).
    G14610231Courtesy of SUBARU OF AMERICA, INC.
  3. For drive wheel, drive the tires with engine for measurement.
  4. For non-drive wheel, drive the tires from the on the car wheel balancer for measurement.
scientia non olet · About LEMON Manuals