Airbag Module Disposal (Deployment Processing on Vehicle): Procedure: Notes

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Refer to "CAUTION" of "General Description" before handling the airbag system components. Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION
Before discarding an airbag module, always perform an operation process to prevent any false activation.
Wear protective gloves, safety goggles and earplugs during this operation. Wash your hands afterwards.
Do not touch the airbag module just after activation because it is very hot. Before handling it for disposal, wait for 40 minutes.
As a rule, perform an airbag module operation process while it is installed to the vehicle. Do not remove it unless necessary.
Airbag module operation process should be performed on a flat place in safety area. Do not perform the process outdoors when there is rain or strong wind.
Activating an airbag module causes a high explosive noise, be sure to warn people in the area, and do not allow anyone within 5 m (16 ft) radius of the disposal site.
After activating the airbag module, smoke may arise. Therefore, it must be activated in a well-ventilated place with no smoke detector nearby.
Do not expose the activated airbag module to water.
Wrap the activated airbag module in a sealed vinyl bag when discarding.
If it is impossible to perform an airbag module operation process due to some situational reasons, consult SUBARU dealership or one of the authorized workshops.