LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Air Bag System) >> Impact Sensor >> Installation >> Front impact sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front impact sensor

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Refer to "CAUTION" of "General Description" before handling the airbag system components. Ref. to  AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION  

  1. Before installation, inspect the following items and replace any faulty part with a new part.
    • Front impact sensor is free from damage.
    • Connector is free from damage.
  2. Using a new flange bolt, install Front impact sensor.
    CAUTION:

    When installing the sensor, insert the set pin on the backside of the sensor into the hole on the body side securely. 

    Tightening torque: 

    13 N.m (1.3 kgf-m, 9.6 ft-lb)

  3. Connect the airbag connector. Ref. to AIRBAG SYSTEM>AIRBAG CONNECTOR>PROCEDURE>EACH IMPACT SENSOR 
  4. Install the air intake duct (rear). (When removing the sensor RH) Ref. to INTAKE (INDUCTION) (H4DOTC)>INTAKE DUCT>INSTALLATION
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
scientia non olet · About LEMON Manuals