LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2016 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Continuously Variable Transaxle (CVT)) >> General Description >> Preparation Tool >> Special Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Special Tool

WARNING: This page is about a different variant/trim than selected.
ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
ST41099AC000 41099AC000 ENGINE SUPPORT ASSY Used for supporting engine.
ST18801AA000 18801AA000 OIL PRESSURE GAUGE ASSY Used for measuring the secondary pressure (line pressure).
ST18658AA020 18658AA020 WRENCH COMPL RETAINER Used for removing and installing the differential side retainer.
ST18681AA000 18681AA000 PRESSURE GAUGE ADAPTER Used for measuring the secondary pressure (line pressure) and transfer clutch hydraulic pressure.
NOTE: Used together with the genuine O-ring (part No. 806911080).
ST18769AA000 18769AA000 EXPANDER PULLEY Used for removing and installing the secondary pulley assembly.
ST-498897700 498897700 OIL PRESSURE ADAPTER SET Used for measuring the secondary pressure (line pressure) hydraulic pressure.
ST34099AC020 34099AC020 ADAPTER HOSE B Used for measuring the transfer clutch hydraulic pressure.
NOTE: Used with genuine union screw (Part No. 801914010) and gasket (Part No. 803914060).
ST34099AC010 34099AC010 ADAPTER HOSE A Used for measuring the transfer clutch hydraulic pressure.
ST73099SG000 73099SG000 SPECIAL TOOL CONDENSER Used for installing the transfer clutch pressure test plug.
ST18270AA040 18270AA040 SOCKET Used for installing the transfer clutch pressure test plug.
ST-498575400 498575400 OIL PRESSURE GAUGE ASSY Used for measuring the transfer clutch hydraulic pressure.
ST-498277200 498277200 STOPPER SET
  • Used for removing and installing automatic transmission assembly to engine.
  • Used for preventing the torque converter from dropping off.
ST-398527700 398527700 PULLER ASSY
  • Used for removing the extension case oil seal.
  • Used for removing the roller bearing of the primary pulley and secondary pulley.
  • Used for removing the bearing of reduction driven gear.
  • Used for removing the differential side retainer bearing outer race.
ST18760AA000 18760AA000 CLAW
  • Used for removing ball bearing of front reduction driven gear.
  • Used together with PULLER ASSY (398527700).
ST-498057300 498057300 INSTALLER Used for installing the extension case oil seal.
ST18632AA000 18632AA000 TRANSMISSION STAND Used for disassembling and assembling the transmission.
ST-498255400 498255400 PLATE Used for measuring the backlash of hypoid gear.
ST-498247001 498247001 MAGNET BASE
  • Used for measuring the backlash of differential bevel pinion.
  • Used for measuring the backlash of hypoid gear.
  • Used together with DIAL GAUGE (498247100).
ST-498247100 498247100 DIAL GAUGE
  • Used for measuring the backlash of differential bevel pinion.
  • Used for measuring the backlash of hypoid gear.
  • Used together with DIAL GAUGE (498247101).
ST18675AA000 18675AA000 DIFFERENTIAL SIDE OIL SEAL INSTALLER Used for installing the differential side retainer oil seal.
ST18762AA001 18762AA001 COMPRESSOR SPECIAL TOOL
  • Used for disassembling and installing the multi-plate clutch piston for shifting.
  • COMPRESSOR SPECIAL TOOL (18762AA000) can also be used. (Except for transfer clutch piston)
ST18765AA000 18765AA000 COMPRESSOR SUPPORT Used for disassembling and installing the multi-plate clutch for shifting.
ST18763AA000 18763AA000 COMPRESSOR SHAFT Used for disassembling and installing the multi-plate clutch for shifting.
ST28399SA010 28399SA010 OIL SEAL PROTECTOR Used for protecting oil seal when installing front drive shaft.
ST18667AA010 18667AA010 HOLDER
  • Used for removing and installing the drive pinion lock nut.
  • Used as a holder to rotate gear when checking tooth contact.
ST18270KA010 18270KA010 SOCKET (E16) Used for removing and installing the center support COM PL.
ST18270KA020 18270KA020 SOCKET (E20)
  • Used for removing and installing the hypoid driven gear.
  • Used for removing and installing the drive pinion shaft retainer.
ST-398497701 398497701 SEAT Used for removing and installing the ball bearing.
ST-398177700 398177700 INSTALLER
  • Used for removing and installing the ball bearing and tapered roller bearing.
  • Used for installing the parking gear.
ST-398643600 398643600 GAUGE Used for measuring the total end play, extension end play and drive pinion height.
ST-899864100 899864100 REMOVER Used for removing and installing the ball bearing.
ST-498077000 498077000 REMOVER
  • Used for removing ball bearing of front reduction drive gear.
  • Used for removing the inner bearing inner race of the drive pinion shaft.
  • Used for removing the differential taper roller bearing.
ST18657AA010 18657AA010 INSTALLER Used for installing the oil seal of inhibitor switch.
ST18657AA020 18657AA020 OIL SEAL INSTALLER Used for installing the oil seal.
ST18620AA000 18621AA000 ADAPTER WRENCH Used for removing and installing the drive pinion shaft lock nut.
ST18651AA000 18651AA000 INSTALLER Used for installing the bearing of front reduction drive gear.
ST18720AA000 18720AA000 REMOVER Used for removing ball bearing of reduction driven gear.
ST-498497300 498497300 CRANKSHAFT STOPPER Used for stopping the drive plate rotation when removing and installing the drive plate.
ST20299AG010 20299AG010 PRESS SNAP RING Used for installing the bearing on primary pulley side.
ST-398791600 398791600 REMOVER Used for removing and installing the shifter arm spring pin.
ST-399513600 399513600 INSTALLER
  • Used to install the rear drive shaft ball bearing.
  • Used for removing the bearing of the oil pump chain sprocket.
ST-499267300 499267300 STOPPER PIN Used for adjusting the inhibitor switch.
ST-499277100 499277100 BUSHING 1-2
  • Used for installing the front differential taper INSTALLER roller bearing.
  • Used for removing and installing the transfer reduction drive gear.
  • Used for installing the ball bearing of the transfer reduction drive gear.
  • Used for installing the oil seal.
  • Used for installing the ball bearing of the transfer reduction driven gear.
ST-499277200 499277200 INSTALLER
  • Used for installing the inner bearing inner race of drive pinion shaft.
  • Used for installing the reduction driven gear.
ST-499575400 499575400 GAUGE Used for measuring height of end play.
ST-499575600 499575600 GAUGE Used for measuring height of end play.
ST-398744300 398744300 PISTON GUIDE Used for measuring height of end play.
ST-499787700 499787700 WRENCH Used for measuring the differential pinion shaft backlash.
ST-499757002 499757002 INSTALLER Used for removing the bearing of front reduction driven gear.
ST18767AA000 18767AA000 BEARING REMOVER Used for removing the reduction driven gear bearing retainer.
ST-49755602 499755602 PRESS SNAP RING
  • Used for installing the oil seal.
  • Used for installing the ball bearing and roller bearing.
  • Used for installing the ball bearing of the front reduction driven gear.
ST-498077600 498077600 REMOVER
  • Used for removing the ball bearing of the rear drive shaft.
  • Used for removing the ball bearing of transfer reduction driven gear.
  • Used for removing ball bearing of reduction driven gear.
  • Used for removing the ball bearing of drive sprocket.
ST18460AA040 18460AA040 (Newly adopted tool) CHECK BOARD Used for inspecting the TCM terminal.
STSSM4 - (Newly adopted tool) SUBARU SELECT MONITOR 4 Used for setting of each function and troubleshooting for electrical system.
NOTE: For detailed operation procedures of Subaru Select Monitor 4, refer to "Application help".
Fig 1: ST41099AC000
G05002430Courtesy of SUBARU OF AMERICA, INC.
Fig 2: ST18801AA000
G07913243Courtesy of SUBARU OF AMERICA, INC.
Fig 3: ST18658AA020
G06651903Courtesy of SUBARU OF AMERICA, INC.
Fig 4: ST18681AA000
G07913245Courtesy of SUBARU OF AMERICA, INC.
Fig 5: ST18769AA000
G06654298Courtesy of SUBARU OF AMERICA, INC.
Fig 6: ST-498897700
G05002427Courtesy of SUBARU OF AMERICA, INC.
Fig 7: ST34099AC020
G05032873Courtesy of SUBARU OF AMERICA, INC.
Fig 8: ST34099AC010
G05032872Courtesy of SUBARU OF AMERICA, INC.
Fig 9: ST73099SG000
G09476389Courtesy of SUBARU OF AMERICA, INC.
Fig 10: ST18270AA040
G10218480Courtesy of SUBARU OF AMERICA, INC.
Fig 11: ST-498575400
G05002425Courtesy of SUBARU OF AMERICA, INC.
Fig 12: ST-498277200
G04997553Courtesy of SUBARU OF AMERICA, INC.
Fig 13: ST-398527700
G04993999Courtesy of SUBARU OF AMERICA, INC.
Fig 14: ST18760AA000
G05003217Courtesy of SUBARU OF AMERICA, INC.
Fig 15: ST-498057300
G05002432Courtesy of SUBARU OF AMERICA, INC.
Fig 16: ST18632AA000
G05003188Courtesy of SUBARU OF AMERICA, INC.
Fig 17: ST-498255400
G05002439Courtesy of SUBARU OF AMERICA, INC.
Fig 18: ST-498247001
G05002441Courtesy of SUBARU OF AMERICA, INC.
Fig 19: ST-498247100
G05002442Courtesy of SUBARU OF AMERICA, INC.
Fig 20: ST18675AA000
G05002460Courtesy of SUBARU OF AMERICA, INC.
Fig 21: ST18762AA001
G09487703Courtesy of SUBARU OF AMERICA, INC.
Fig 22: ST18765AA000
G05022167Courtesy of SUBARU OF AMERICA, INC.
Fig 23: ST18763AA000
G05022166Courtesy of SUBARU OF AMERICA, INC.
Fig 24: ST28399SA010
G05002461Courtesy of SUBARU OF AMERICA, INC.
Fig 25: ST18667AA010
G05022160Courtesy of SUBARU OF AMERICA, INC.
Fig 26: ST18270KA010
G07669228Courtesy of SUBARU OF AMERICA, INC.
Fig 27: ST18270KA020
G06338208Courtesy of SUBARU OF AMERICA, INC.
Fig 28: ST-398497701
G05002462Courtesy of SUBARU OF AMERICA, INC.
Fig 29: ST-398177700
G05002948Courtesy of SUBARU OF AMERICA, INC.
Fig 30: ST-398643600
G05002448Courtesy of SUBARU OF AMERICA, INC.
Fig 31: ST-899864100
G05002935Courtesy of SUBARU OF AMERICA, INC.
Fig 32: ST-498077000
G05002433Courtesy of SUBARU OF AMERICA, INC.
Fig 33: ST18657AA010
G05003190Courtesy of SUBARU OF AMERICA, INC.
Fig 34: ST18657AA020
G05003220Courtesy of SUBARU OF AMERICA, INC.
Fig 35: ST18620AA000
G05003208Courtesy of SUBARU OF AMERICA, INC.
Fig 36: ST18651AA000
G05003203Courtesy of SUBARU OF AMERICA, INC.
Fig 37: ST18720AA000
G05003213Courtesy of SUBARU OF AMERICA, INC.
Fig 38: ST-498497300
G07665421Courtesy of SUBARU OF AMERICA, INC.
Fig 39: ST20299AG010
G05032323Courtesy of SUBARU OF AMERICA, INC.
Fig 40: ST-398791600
G05955923Courtesy of SUBARU OF AMERICA, INC.
Fig 41: ST-399513600
G07913281Courtesy of SUBARU OF AMERICA, INC.
Fig 42: ST-499267300
G05002445Courtesy of SUBARU OF AMERICA, INC.
Fig 43: ST-499277100
G05002922Courtesy of SUBARU OF AMERICA, INC.
Fig 44: ST-499277200
G05002923Courtesy of SUBARU OF AMERICA, INC.
Fig 45: ST-499575400
G05022173Courtesy of SUBARU OF AMERICA, INC.
Fig 46: ST-499575600
G06654336Courtesy of SUBARU OF AMERICA, INC.
Fig 47: ST-398744300
G05002451Courtesy of SUBARU OF AMERICA, INC.
Fig 48: ST-499787700
G05002446Courtesy of SUBARU OF AMERICA, INC.
Fig 49: ST-499757002
G05002924Courtesy of SUBARU OF AMERICA, INC.
Fig 50: ST18767AA000
G05022178Courtesy of SUBARU OF AMERICA, INC.
Fig 51: ST-49755602
G10293107Courtesy of SUBARU OF AMERICA, INC.
Fig 52: ST-498077600
G05002454Courtesy of SUBARU OF AMERICA, INC.
Fig 53: ST18460AA040
G10218429Courtesy of SUBARU OF AMERICA, INC.
Fig 54: STSSM4
G10289719Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals