Check Accelerator Pedal Sensor Area (Method With SUBARU Select Monitor)
WARNING: This page is about a different variant/trim than selected.
- Turn the ignition switch to ON. (engine OFF)
- Read the accelerator pedal opening angle signal and voltage of accelerator pedal sensor using Subaru Select Monitor. < Ref. to
DISPLAY CURRENT ENGINE DATA
, OPERATION, Subaru Select Monitor. >
Accelerator pedal sensor Accelerator pedal opening angle signal Standard Main 0.0% 0.4 - 1.0 V 100.0% 2.4 - 3.7 V Sub 0.0% 0.4 - 1.0 V 100.0% 2.4 - 3.7 V