Inspection steps
- Check ABS or VDC warning light.
- Turn the ignition switch to ON.
- After the initial operation of combination meter is completed, check if ABS or VDC warning light continues to illuminate.
Criteria: Warning light is OFF.
NO: Check VSC system. (For procedures, refer to How to troubleshoot )
YES
- Check CAN communication system.
- Check CAN communication system. (Refer to
How to troubleshoot
)
Criteria: No fault is found.
NO: Repair according to the CAN communication system.
YES: Replace the ECM.
- Check CAN communication system. (Refer to
How to troubleshoot
)