| IG power supply |
1 ←→ Chassis ground |
Ignition switch ON |
8 - 16 V |
| GND |
2 ←→ Chassis ground |
Always |
Less than 1 Ω |
| Rr vehicle height sensor GND |
3 ←→ Chassis ground |
Always |
Less than 1 Ω |
| Indicator output |
6 ←→ Chassis ground |
After turning the ignition switch to ON, for 3 seconds (warning light on) → after 3 seconds (warning light off) |
Less than 1.35 V → 8 - 16 V |
| Leveling actuator power supply |
10 ←→ Chassis ground |
Ignition switch ON |
10 - 16 V |
| Leveling actuator GND |
11 ←→ Chassis ground |
Always |
Less than 1 Ω |
| Rr vehicle height sensor power supply |
12 ←→ 3 |
Ignition switch ON |
4.75 - 5.25 V |
| Leveling actuator signal |
17 ←→ Chassis ground |
Headlight off → on |
Less than 1 V → 1.0 - 14.4 V (for 17 seconds) |
| Headlight on, no vehicle height change → change and hold vehicle height for 3 seconds or more |
| Rr sensor signal |
19 ←→ Chassis ground |
IG ON (with no passenger, no load and vehicle stopped) |
Approx. 2.5 V (changes according to vehicle condition) |
| CAN-H |
23 |
Cannot be measured (CAN communication line) |
- |
| CAN-L |
24 |
Cannot be measured (CAN communication line) |
- |