Multi Function Display

• Standard type
  Fig 1: Multi Function Display Connector Terminals - Standard Type

  Courtesy of SUBARU OF AMERICA, INC.

  Terminal No.	Item	Measuring condition	Standard
  1 (+B) ←→ Chassis ground	Voltage	Always	10 - 14 V
  2 (GND) ←→ Chassis ground	Resistance	Always	Less than 1 Ω
  3 (IG) ←→ Chassis ground	Voltage	IG OFF → ON	0 V → 10 - 14 V
  9 (U-ART com.)	-	Cannot be measured	-
  10 ←→ Chassis ground	Voltage	Passenger's airbag ON indicator light OFF → ON	0 V → 1.5 V
  11 ←→ Chassis ground	Voltage	Passenger's airbag OFF indicator light OFF → ON	0 V → 1.5 V

• High grade type

Refer to "Control Module I/O Signal" of "INSTRUMENTATION/DRIVER INFO (DIAGNOSTICS)" article. Ref. to ELECTRICAL SPECIFICATION , Control Module I/O Signal.