Multi Function Display

Disconnect the ground cable from battery. Ref. to NOTE>NOTE>BATTERY .
NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
Remove the center grille assembly. Ref. to HVAC SYSTEM (HEATER, VENTILATOR AND A/C)>Air Vent Grille>REMOVAL>CENTER GRILLE ASSEMBLY .
Release the claw and hook, and then remove the cover center UPR.

Fig 1: Removing Cover Center UPR
Courtesy of SUBARU OF AMERICA, INC.

NOTE: Lightly push up the back of the cover center UPR, hook the finger to the end portion and pull it toward you to remove it.
Remove the multi-function display.
CAUTION: Be careful not to damage the multi-function display or instrument panel.
1. Release the screws and claws.
2. Pull the multi-function display assembly toward you, and disconnect the connector.
  
  Fig 2: Locating Multi-Function Display Assembly Screws And Claws
  Courtesy of SUBARU OF AMERICA, INC.
3. Remove the screw, and remove the multi-function display from the panel - display.

Fig 3: Locating Multi-Function Display Assembly Screws

Courtesy of SUBARU OF AMERICA, INC.