External Connection Terminal: Removal

Disconnect the ground terminal from the battery sensor, and wait for at least 60 seconds before starting work. Ref. to BATTERY
Remove the heater control assembly. Ref. to REMOVAL , Control Panel.
Remove the cover assembly - front and the console box assembly. Ref. to REMOVAL , Console Box.
Release the claws, and then remove the panel center LWR.

Fig 1: Identifying Panel Center Lower Claws
Courtesy of SUBARU OF AMERICA, INC.
Remove the screws and remove the pocket assembly - CTR.

Fig 2: Identifying CTR Pocket Assembly Screws
Courtesy of SUBARU OF AMERICA, INC.
While pressing the claw, press it in from the rear to remove the unit assembly - AUX.

Fig 3: Removing AUX Unit Assembly
Courtesy of SUBARU OF AMERICA, INC.