Radiator Fan Control Module (Sub)

WARNING: This page is about a different variant/trim than selected.

Install the radiator fan control module (sub), and install the bolts securing the radiator fan control module (sub).
Tightening torque:

2.6 N.m (0.3 kgf-m, 1.9 ft-lb)
Connect the radiator fan harness connector (A) and radiator sub fan motor connector (B) to the radiator fan control module (sub).

Fig 1: Identifying Radiator Fan Control Module Bolts (Sub)
Courtesy of SUBARU OF AMERICA, INC.
Install the air intake duct. Ref. to INSTALLATION , Air Intake Duct.
Connect the ground terminal to battery sensor. Ref. to BATTERY
NOTE: Repair Contents.