LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Fuel Injection System (H6DO)) >> Intake Manifold >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Manifold: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the fuel injector pipe and the fuel hose, and remove the fuel pipe assembly.
    Fig 1: Locating Fuel Pipe Assembly Bolts
    G10263560Courtesy of SUBARU OF AMERICA, INC.
    Fig 2: Locating Fuel Injector Pipe And Fuel Hose Bolts
    G10263561Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the engine harness. <Ref. to ENGINE HARNESS , COMPONENT, General Description.>
  3. Remove the EGR control valve. <Ref. to REMOVAL , EGR Control Valve.>
  4. Remove the EGR pipe B. <Ref. to EGR PIPE B , REMOVAL, EGR Pipe.>
  5. Remove the manifold absolute pressure sensor. <Ref. to REMOVAL , Manifold Absolute Pressure Sensor.>
  6. Remove the purge control solenoid valve. <Ref. to REMOVAL , Purge Control Solenoid Valve.>
scientia non olet · About LEMON Manuals