LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Fuel Injection System (H6DO)) >> Oil Temperature Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Oil Temperature Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the oil temperature sensor to the cylinder block, and connect the connector to the oil temperature sensor.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb) 

  2. Connect the ground terminal to battery sensor. <Ref. to BATTERY , NOTE, Repair Contents.>
  3. Install the collector cover.
scientia non olet · About LEMON Manuals