LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Outback 2.5i >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Continuously Variable Transaxle (CVT) (H4DO) >> Primary Speed Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Primary Speed Sensor: Installation

CAUTION: Be sure to prevent water or oil from contacting the connector terminal of primary speed sensor. If adhesion occurs, replace with a new part.
  1. Connect the harness connector.
  2. Install the primary speed sensor.
    NOTE:
    • Use new O-rings.
    • Apply CVTF to the O-rings.

    Tightening torque: 

    7 N.m (0.7 kgf-m, 5.2 ft-lb) 

  3. Install the transmission assembly. <Ref. to INSTALLATION , Automatic Transmission Assembly.>
scientia non olet · About LEMON Manuals