LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> Outback 3.6R Touring >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling Fan >> Engine Cooling System (H6DO) >> Radiator Fan Control Unit >> Installation >> Radiator Fan Control Module (Sub)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Radiator Fan Control Module (Sub)

  1. Install the radiator fan control module (sub), and install the bolts securing the radiator fan control module (sub).

    Tightening torque: 

    2.6 N.m (0.3 kgf-m, 1.9 ft-lb) 

  2. Connect the radiator fan harness connector (A) and radiator sub fan motor connector (B) to the radiator fan control module (sub).
    Fig 1: Identifying Radiator Fan Control Module Bolts (Sub)
    G10264218Courtesy of SUBARU OF AMERICA, INC.
  3. Install the air intake duct. Ref. to INSTALLATION , Air Intake Duct.
  4. Connect the ground terminal to battery sensor. Ref. to BATTERY
    NOTE: Repair Contents.
scientia non olet · About LEMON Manuals