Check Ignition Switch Illumination
| Step | Check | Yes | No |
|---|---|---|---|
| 1 CHECK IGNITION CIRCUIT
. Check the ignition circuit. <Ref. to CHECK IGNITION SWITCH CIRCUIT , INSPECTION, Security System.> |
Is the switch circuit normal? | Go to step 2 . | Repair or replace. |
| 2 CHECK DOOR SWITCH CIRCUIT
. Inspect door switch circuit. <Ref. to CHECK DOOR SWITCH , INSPECTION, Keyless Entry System.> |
Is the switch circuit normal? | Go to step 3 . | Repair or replace. |
| 3 CHECK FUSE
. Remove and visually check fuse No. 14 (in the main fuse box). |
Is the fuse blown out? | Replace the fuse with a new part. | Go to step 4 . |
4 CHECK HARNESS
.
|
Is the voltage 10 V or more? | Go to step 5 . | Check the harness for open or short circuits between the ignition switch illumination and fuse. |
5 CHECK IGNITION SWITCH ILLUMINATION CIRCUIT
.
|
Is harness normal? | Go to step 6 . | Check the harness for open circuits and shorts between the body integrated unit and ignition switch illumination. |
| 6 CHECK IGNITION SWITCH ILLUMINATION BULB
. Apply battery voltage between terminals of the bulb. Terminals No. 2 (+) - No. 6 (-): |
Does the bulb illuminate? | Replace the body integrated unit. <Ref. to BODY INTEGRATED UNIT .> | Replace the immobilizer antenna. <Ref. to REMOVAL , Immobilizer Antenna.> |