CVT Model
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
- Get into the vehicle while carrying the access key, with the vehicle in "P range" and the brake pedal OFF, and check that it cycles through ACC → ignition switch ON → ignition switch OFF every time the push button ignition switch is pressed, and that the indicator light for the push button ignition switch is illuminated in orange when the ignition switch is in the ACC and ignition switch ON positions.
- Get into the vehicle while carrying the access key, with the vehicle in "P range" and the brake pedal ON, check that the indicator light for the push button ignition switch is illuminated in green.NOTE:
While the select lever button is being pressed, the indicator light of the push button ignition switch does not illuminate in green even if the shift position is in the "P range".
- Get into the vehicle while carrying the access key, with the vehicle in "P range" and the brake pedal ON, check that the engine starts when you press the push button ignition switch.
- With the vehicle stopped, the engine running and in "P range", check that the engine stops when you press the push button ignition switch.
- With the vehicle stopped, the engine running and in "N range", check that the engine stops when you press the push button ignition switch, and it cycles through ACC → ignition switch ON each time you press the push button ignition switch.