Section 16 (Engine Starting System & Charging System): Battery: Inspection: Notes
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- As batteries produce flammable gases, be careful not to bring an open flame close to the batteries.
- Ventilate sufficiently when using or charging battery in enclosed space.
- Electrolyte is corrosive acid, and has toxicity; be careful of handling the fluid.
- For safety, in case an explosion does occur, wear protective goggles, etc. to shield your eyes when working near any battery. In addition, never lean over the battery.
- Be careful that the electrode does not come into contact with skin, eyes or clothing. Especially at contact with eyes, flush with water for 15 minutes and get prompt medical attention.
- Be careful not to let the electrode contact with the coated parts.
- Before starting work, remove rings, metal watch-bands, and other metal jewelry.
- Be careful not to let the metal tools contact the positive battery terminal and anything connected to it. When the operation using a metal tool to the positive terminal or anything connected to it is required, disconnect the ground terminal from the battery sensor before starting the operation.