LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Vehicle Dynamics Control (VDC) System) >> Front ABS Wheel Speed Sensor >> Installation >> Electronically-Controlled Damper Model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Electronically-Controlled Damper Model

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Be careful not to damage the sensor. 
  • Do not apply excessive force to the sensor harness. 
NOTE:

Check the identification (mark) on the sensor harness to make sure there is no twisting. Ref. to  VEHICLE DYNAMICS CONTROL (VDC)>GENERAL DESCRIPTION>SPECIFICATION  . 

  1. Install the electric damper harness ABS assembly front.

    Tightening torque: 

    Refer to "COMPONENT" of "General Description" for the tightening torque. Ref. to VEHICLE DYNAMICS CONTROL (VDC)>GENERAL DESCRIPTION>COMPONENT>ABS WHEEL SPEED SENSOR .

  2. Connect each connector of the electric damper harness ABS assembly front.
  3. Install the front wheels. Ref. to WHEEL AND TIRE SYSTEM>TIRE AND WHEEL>INSTALLATION .
    NOTE:

    Check if the harness is not pulled and does not come in contact with the suspension or body while operating the steering. 

  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals