VDC Control Module Parameter Check
WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The parameter data registered in the VDC Control Module is shown on the display.
- Using the Subaru Select Monitor, select [Confirm on parameter] in [Work Support] of [Brake Control]. Ref. to COMMON (DIAGNOSTICS)>WORK SUPPORT .
- Check that the applied model and grade of the target vehicle are included, and click the [OK] button.
- If the applied model and grade of the target vehicle are not included, perform "parameter selection and registration". Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDC CONTROL MODULE & H/U)>MAINTENANCE MODE>VDC CONTROL MODULE PARAMETER SELECTION .