LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Vehicle Dynamics Control (VDC) System) >> VDC Sequence Control >> Operation >> VDC Sequence Control With SUBARU Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VDC Sequence Control With SUBARU Select Monitor

WARNING: This page is about a different car, the 2022 Subaru WRX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • While the VDC sequence control is performed, the operation of the hydraulic unit can be checked using the brake tester or pressure gauge after the hydraulic unit solenoid valve is operated. 
  • VDC sequence control can be started by Subaru Select Monitor. 
  • In the event of any trouble, sequence control will not operate. 
  1. Using the Subaru Select Monitor, select [VDC Check Mode] in [Work Support] of [Brake Control]. Ref. to COMMON (DIAGNOSTICS)>WORK SUPPORT .
  2. Perform the operation according to the display screen.
  3. The brake system being operated is displayed on the Subaru Select Monitor.
scientia non olet · About LEMON Manuals