DTC Check/Clear
- CHECK DTC
- Connect the SSM4 to the DLC3.
- Turn the engine switch on (IG).
- Turn the SSM4 on.
- Enter the following menus: [Keyless Access(Collation ECM)] →[DTC]
- Check for DTCs.
- CLEAR DTC
- Connect the SSM4 to the DLC3.
- Turn the engine switch on (IG).
- Turn the SSM4 on.
- Enter the following menus: [Keyless Access(Collation ECM)] →[DTC] →[Clear Memory]
- Clear the DTCs.