LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Seat Belt Warning System >> Customize Parameters
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

  1. CUSTOMIZE SEAT BELT WARNING SYSTEM
    NOTE: The following items can be customized.
    CAUTION:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    • These buzzers should be ON for safe driving. Perform this procedure only if it is necessary to set the buzzer to OFF (disabled).
  1. Customizing with the SSM4
    1. Connect the SSM4 to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the SSM4 on.
    4. Enter the following menus: [Each System]/[Combination Meter]/[Customize]
    5. Select the setting by referring to the table below.
CONTENT DESCRIPTION - WARNING

Display Default Content Setting Relevant ECU
Driver Side Seatbelt Warning Buzzer ON Function to sound the driver seat belt warning buzzer ON/OFF Combination meter
Front Passenger Side Seatbelt Warning Buzzer ON Function to sound the front passenger seat belt warning
buzzer		 ON/OFF assembly
NOTE: This setting is only valid when the vehicle is driven at 20 km/h (12 mph) or more.
scientia non olet · About LEMON Manuals