LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> Ignition Timing >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Timing: Inspection

CAUTION: After warming-up, engine becomes very hot. Be careful not to burn yourself at measurement.
  1. Before checking the ignition timing, check the following item:
    1. Check the air cleaner element is free from clogging, spark plugs are in good condition, and hoses are connected properly.
    2. Check the malfunction indicator light does not illuminate.
  2. Warm up the engine.
  3. Read the ignition timing using Subaru Select Monitor. Ref. to ENGINE (DIAGNOSTICS) (H4DO)>Data Monitor>OPERATION .
    NOTE: If ignition timing is out of the standard value, check the ignition control system. Refer to "Engine Control System". Ref. to ENGINE (DIAGNOSTICS) (H4DO)>BASIC DIAGNOSTIC PROCEDURE .

    Ignition timing [BTDC/{r/min}]: 

    CVT model 

    Standard 

    6°±10°/775

    MT model 

    Standard 

    6°±10°/650

scientia non olet · About LEMON Manuals