LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Forester 2.0XT Premium >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Engine Control/Fuel Injection System (H4DO)) >> Engine Control Module (ECM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module (ECM): Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to NOTE>NOTE>BATTERY .
  2. Remove the glove box. Ref. to EXTERIOR/INTERIOR TRIM>Glove Box>REMOVAL .
  3. Push down the claws, and remove the relay block.
    G12505411Courtesy of SUBARU OF AMERICA, INC.
  4. While pressing the section (A) shown in the figure, move the lock lever (B) in the direction of the arrow to disconnect the bulkhead harness connectors from the ECM in numerical order as shown in the figure.
    G12505412Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the bolts and nuts, and remove the ECM.
    G12505413Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the ECM from the bracket.
    G12505414Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals