LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Forester 2.5i Touring >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Diagnostics - Introduction) (H4DO) >> Clear Memory Mode >> Operation >> SUBARU Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

SUBARU Select Monitor

  1. On [Start] display, select [Diagnosis].
  2. On [Vehicle selection] display, enter vehicle information and select [OK].
  3. On [Main Menu] display, select [Each System].
  4. On [Select System] display, select [Engine Control System] and select [Enter].
  5. On [Select Function] display, select [DTC].
  6. On [DTC] display, select [Clear memory].
NOTE:
  • Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
  • For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
scientia non olet · About LEMON Manuals