Engine Wiring Harness: Removal

Disconnect the ground cable from battery. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
Remove the intake manifold assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Intake Manifold Assembly>REMOVAL .
Remove the fuel insulator. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>Fuel Insulator>REMOVAL .
Remove the engine wiring harness and the battery cables from the bracket.

Fig 1: Locating Bracket, Engine Wiring Harness & Battery Cables
Courtesy of SUBARU OF AMERICA, INC.
Disconnect each connector to remove the engine wiring harness. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>General Description>COMPONENT>ENGINE WIRING HARNESS .

NOTE:

For the variable capacity A/C model, disconnect the fuel injector #2 connector at the coupling harness side, and then remove the tape (a).

Fig 2: Locating Fuel Injector Connector (LH)

Courtesy of SUBARU OF AMERICA, INC.

For removal of the coupling harness for variable capacity A/C model, refer to "Fuel Injector". Ref. to FUEL INJECTOR LH .