Electrical Specification

Fig 1: Locating AT Shift Lock Control System Connector Terminals

Courtesy of SUBARU OF AMERICA, INC.

Item	Connector No.	Terminal No.	Input/Output signal
Item	Connector No.	Terminal No.	Measured value and measuring conditions
Battery power supply	B280	1	9 - 16 V
	B281	7
	B287	4
TCM ("P" range)	B281	17	Pulse signal (CAN communication)
TCM ("P" range)	B281	19	Pulse signal (CAN communication)
Stop light switch	B281	16	9 - 16 V when stop light switch is ON 1 V when stop light switch is OFF
"P" range switch	i171	40	Less than 1 V when select lever is in "P" range 9 - 16 V when select lever is in other positions than "P" range
Solenoid unit output	i84	3	9 - 16 V when shift lock is released Less than 1 V when shift lock is operating
Key warning switch signal (Model without push button ignition switch)	i84	1	9 - 16 V when key is inserted Less than 1 V when key is removed
Key lock solenoid signal (Model without push button ignition switch)	B280	12	9 - 16 V when the key is inserted with the select lever shifted in positions other than "P" range Less than 1 V at other conditions than above

Item	Connector No.	Terminal No.	Input/Output signal
Item	Connector No.	Terminal No.	Measured value and measuring conditions
Ground	i84	4	Less than 1 V