Oil Level Switch: Installation
- Install the oil level switch, and install the clip (A) to the oil pan upper.NOTE:
- Use new O-rings.
- Apply a coat of engine oil to the O-rings.
Tightening torque:
6.4 N.m (0.7 kgf-m, 4.7 ft-lb)
- Attach the clip (A) securing the harness, and connect the connector of the oil level switch to the engine wiring harness.
- Install the under cover. Ref. to EXTERIOR/INTERIOR TRIM>Front Under Cover>INSTALLATION .
- Lower the vehicle.
- Fill engine oil. Ref. to LUBRICATION(H4DO)>Engine Oil>REPLACEMENT .
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .