LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2018 >> Outback 2.5i >> Repair and Diagnosis >> General Information >> OEM General Information >> General Information & Specifications >> Pre-Delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Push Button Start Function
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Push Button Start Function

  1. Get into the vehicle while carrying the access key, with the vehicle in P range and the brake pedal OFF, and check that every time the push button ignition switch is pressed, that it cycles through ACC → IGN ON → IGN OFF, and the indicator light for the push button ignition switch is illuminated in orange.
  2. Get into the vehicle while carrying the access key, with the vehicle in P range and the brake pedal ON, check that the indicator light for the push button ignition switch is illuminated in green.
    NOTE: While the select lever button is being pressed, the indicator light of the push button ignition switch does not illuminate in green even if the shift position is in the P range.
  3. Get into the vehicle while carrying the access key, with the vehicle in P range and the brake pedal ON, check that the engine starts when you press the push button ignition switch.
  4. With the vehicle stopped, the engine running and in P range, check that the engine stops when you press the push button ignition switch.
  5. With the vehicle stopped, the engine running and in N range, check that the engine stops when you press the push button ignition switch, and cycles through ACC → IGN ON each time you press the push button ignition switch.
scientia non olet · About LEMON Manuals