| DST-i |
Used together with Subaru Select Monitor 4. |
| Alignment gauge |
Used for measuring wheel alignment. |
| Alignment gauge adapter |
Used for measuring wheel alignment. |
| Turning radius gauge |
Used for measuring wheel alignment. |
| Toe-in gauge |
Used for toe-in measurement. |
| Chain sling |
- Used for hanging power unit.
- Diameter: 6 mm (0.24 in) or 6.3 mm (0.25 in)
- Length: 0.8 - 1 m (2.6 - 3.3 ft)
- Chain inner width: 8.5 mm (0.33 in) or more
- Chain external width: 23.5 mm (0.93 in) or less
- Load capacity: 1.2 t (2646 lb) or more
|
| Shackle |
- Two units used for hanging power unit.
- Attached to both end of chain sling and connected to engine hook.
- Load capacity: 250 kg (551 lb) or more
|
| Sling belt |
- Used to remove and install the cradle.
- Width: 35 - 40 mm (1.38 - 1.57 in)
- Length: 2 m (6.6 ft)
- Load capacity: 1 t (2205 lb) or more
|
| Shackle |
- Used to remove and install the cradle.
- Load capacity: 500 kg (1103 lb) or more
|
| Tie-rod ball joint puller |
Used for disconnecting tie-rod end. |
| Dial gauge |
Used for damper strut measurement. |
| Coil spring compressor |
Used for disassembling and assembling strut assembly and shock absorber assembly. |