Starting System & Charging System (Except For STI): Generator: Inspection: Diode
CAUTION:
There is the possibility of damaging the diodes if a mega-tester (used to measure high voltages) or a similar measuring instrument is used. Never use a mega tester or equivalent for this test.
- Check for continuity between the diode lead and terminal E or B. If continuity is not as shown in the table, replace the rectifier.
| TESTER LEAD |
CONTINUITY |
| -LEAD |
+LEAD |
| E |
P1, P2, P3, P4, P5, P6 |
Yes |
| B |
None |
| P1, P2, P3, P4, P5, P6 |
E |
None |
| B |
Yes |
- At digital type tester
| TESTER LEAD |
CONTINUITY |
| -LEAD |
+LEAD |
| E |
P1, P2, P3, P4, P5, P6 |
None |
| B |
Yes |
| P1, P2, P3, P4, P5, P6 |
E |
Yes |
| B |
None |