Starting System & Charging System (Except For STI): Generator: Installation
- Temporarily install the generator bracket to the engine and tighten the bolts in the numerical order.
Tightening Torque:
36 N.m (3.7 kgf-m, 26.6 ft-lb)
- Install the V-belt tensioner assembly. Ref. to MECHANICAL (EXCEPT FOR STI)>V-belt>INSTALLATION>V-BELT TENSIONER ASSY .
- Temporarily install the generator bracket to the generator and tighten the bolts in the numerical order.
Tightening Torque:
25 N.m (2.5 kgf-m, 18.4 ft-lb)
- Connect the connector (A) and terminal (B) to the generator.
Tightening Torque:
15.5 N.m (1.6 kgf-m, 11.4 ft-lb)
- Install the collector cover bracket.
Tightening Torque:
6.4 N.m (0.7 kgf-m, 4.7 ft-lb)
- Install the V-belts. Ref. to MECHANICAL (EXCEPT FOR STI)>V-belt>INSTALLATION>V-BELT .
- Install the brake vacuum pump. Ref. to BRAKE>Brake Vacuum Pump>INSTALLATION .
- Connect the ground terminal to battery sensor. Ref. to NOTE>NOTE>BATTERY .
- Install the collector cover. Ref. to INTAKE (INDUCTION) (EXCEPT FOR STI)>Collector Cover>INSTALLATION .