Check Power Seat Switch: Notes
DRIVER'S SEAT (8-WAY TYPE)
Measure resistance between terminals while operating each switch.
| Switch position | Terminal No. | Standard |
|---|---|---|
| Slide forward | 1 - 8 4 - 7 | Less than 10 Ω |
| Slide rearward | 1 - 7 4 - 8 | Less than 10 Ω |
| Lifter up | 1 - 6 4 - 9 | Less than 10 Ω |
| Lifter down | 1 - 9 4 - 6 | Less than 10 Ω |
| Reclining forward | 1 - 10 4 - 5 | Less than 10 Ω |
| Reclining rearward | 1 - 5 4 - 10 | Less than 10 Ω |
| Tilt up | 1 - 3 4 - 2 | Less than 10 Ω |
| Tilt down | 1 - 2 4 - 3 | Less than 10 Ω |
Replace the power seat switch if the inspection result is not within the standard value.