Inspection steps
- Power window system (initialization)
- Initialize the power window regulator motor ASSY LH (driver's seat) and power window regulator motor ASSY RH (passenger's seat), and verify normal operation. (Refer to
REGISTRATION SETTINGS )
Criteria: It operates properly.
OK: Go to next step
NG: Go to Step 2.
Complete (due to failed initialization)
- Initialize the power window regulator motor ASSY LH (driver's seat) and power window regulator motor ASSY RH (passenger's seat), and verify normal operation. (Refer to
REGISTRATION SETTINGS )
- Installation of door glass slide resistance (driver's door glass)
- Remove the door glass mounting bolts, and check if the door glass can be lifted with hands smoothly without being caught.NOTE:
- The door glass is not in abnormal contact with the glass run.
- Glass run has no deformation or foreign matter inside.
OK: Go to next step
NG: Install the glass properly (remove foreign matter which causes installation failure, fix the installation, or reinstall)
Replacement of the power window regulator motor ASSY (driver's or passenger's seat) (Refer to REMOVAL )
- Remove the door glass mounting bolts, and check if the door glass can be lifted with hands smoothly without being caught.