LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle (Service Information) >> Select Lever >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Lever: Disassembly

  1. Removal of guide plate
    1. Use a flat tip screwdriver to release the claws, and disconnect the connector.
      G12587509Courtesy of SUBARU OF AMERICA, INC.
    2. Use a precision screwdriver (flat tip) to release the connector lock.
      G12587510Courtesy of SUBARU OF AMERICA, INC.
    3. Use a precision screwdriver (flat tip) to pull out the connectors No. 2 and No. 3 of the shift lock solenoid connector and the connectors No. 10 and No. 11 of the manual mode switch connector.
      G12587511Courtesy of SUBARU OF AMERICA, INC.
    4. Remove the clamp push nut and the shaft guide pin.
      G12587512Courtesy of SUBARU OF AMERICA, INC.
    5. Release the 2 claws to remove the guide plate from the base plate.
      G12587513Courtesy of SUBARU OF AMERICA, INC.
  2. Removal of solenoid unit
    1. Pull out the pin and remove the solenoid unit together with the shift lock release arm as a unit.
    2. Remove the shift lock release arm from the solenoid unit.
      G12587514Courtesy of SUBARU OF AMERICA, INC.
  3. Removal of D rod
    1. Remove the D lock clamp.
    2. Remove the D lock spring and the D rod.
    3. Remove the cushion D lock from the D rod.
    4. Remove the bushing D lock.
      G12587515Courtesy of SUBARU OF AMERICA, INC.
  4. Removal of grommet
    1. Remove the grommet from the base plate.
      G12587516Courtesy of SUBARU OF AMERICA, INC.
  5. Removal of arm COMPL
    1. Use a pin punch 3 and hammer to drive out a pin.
      G12587517Courtesy of SUBARU OF AMERICA, INC.
    2. Pull out the arm COMPL from the base plate.
      G12587518Courtesy of SUBARU OF AMERICA, INC.
  6. Removal of select lever COMPL
    1. Remove the select lever COMPL together with the select arm bracket as a single unit.
      G12587519Courtesy of SUBARU OF AMERICA, INC.
  7. Removal of select lever arm bracket
    1. Remove the select lever COMPL from the select arm bracket.
      G12587520Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the rod and the spring from the select arm bracket.
      G08554450Courtesy of SUBARU OF AMERICA, INC.
  8. Removal of gasket
    1. Remove 4 spacer plates to remove the gasket.
      G12587522Courtesy of SUBARU OF AMERICA, INC.
  9. Removal of swivel
    1. Remove the snap pin, then remove the 2 washers, bushing, spacer, and swivel.
G12587523Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals