Transmission Control Computer ASSY: Installation

Installation of transmission control computer ASSY
1. Install the transmission control computer ASSY to the transmission control computer bracket with 2 nuts.
  Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf}
2. Install the transmission control computer ASSY with 2 nuts.
  Standard value: T=7.5N.m {77kgf.cm} {5.5ft.lbf}
3. Connect the 2 connectors to the transmission control computer ASSY.
Installation of the instrument panel under cover SUB-ASSY No. 1 (Refer to INSTALLATION )
Installation of the instrument side panel RH (Refer to INSTALLATION )
Connection of the battery ground terminal
Initialization when removing/installing battery terminals
(Refer to WORKING PRECAUTIONS AND NOTES )