Failsafe List
- Power window fail safeNOTE: If any malfunction occurs on the pulse sensor in the power window regulator motor ASSY LH (driver's seat) and the power window regulator motor ASSY RH (passenger's seat), the fail safe function is triggered.
- If any malfunction occurs on the pulse sensor for the auto-reverse function trigger, or any irregularity exists on window position or learned value, the following power window operations are prohibited.POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY DESCRIPTION
Power window operation Conditions IG ON IG OFF
Under permission of after-key-OFF operationIG OFF
Under prohibition of after-key-OFF operationManual UP (operating switch of own seat) x x - Manual DOWN (operating switch of own seat) 0 x - During AUTO UP HOLD (operating switch of own seat) 0* x - AUTO UP (operating switch of own seat) x x - AUTO DOWN (operating switch of own seat) x x - Manual UP (remote operation) x x - Manual DOWN (remote operation) x x - During AUTO UP HOLD (remote operation) x x - AUTO UP (remote operation) x x - AUTO DOWN (remote operation) x x - POWER WINDOW REGULATOR SWITCH ASSEMBLY DESCRIPTIONPower window operation Conditions IG ON IG OFF
Under permission of after-key-OFF operationIG OFF
Under prohibition of after-key-OFF operationManual UP (operating switch of own seat) x x - Manual DOWN (operating switch of own seat) 0 x - During AUTO UP HOLD (operating switch of own seat) 0* x - AUTO UP (operating switch of own seat) x x - AUTO DOWN (operating switch of own seat) x x - NOTE: 0: Operation permitted
x: Operation prohibited
*: Operating manual UP with AUTO UP HOLD (auto-reverse function is not activated)If pulse sensor is normal, fully close the window with manual operation (AUTO UP HOLD), and keep this operation for 1 second or more. This will cancel the fail safe and enable the AUTO operation.
- Initial failureNOTE: If window position or initialization finished status is failed to be read normally from the EEPROM, the following power window operations are prohibited.POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY DESCRIPTION
Power window operation Conditions IG ON IG OFF
Under permission of after-key-OFF operationIG OFF
Under prohibition of after-key-OFF operationManual UP (operating switch of own seat) x x - Manual DOWN (operating switch of own seat) 0 x - During AUTO UP HOLD (operating switch of own seat) 0* x - AUTO UP (operating switch of own seat) x x - AUTO DOWN (operating switch of own seat) x x - Manual UP (remote operation) x x - Manual DOWN (remote operation) x x - During AUTO UP HOLD (remote operation) x x - AUTO UP (remote operation) x x - AUTO DOWN (remote operation) x x - POWER WINDOW REGULATOR SWITCH ASSEMBLY DESCRIPTIONPower window operation Conditions IG ON IG OFF
Under permission of after-key-OFF operationIG OFF
Under prohibition of after-key-OFF operationManual UP (operating switch of own seat) x x - Manual DOWN (operating switch of own seat) 0 x - During AUTO UP HOLD (operating switch of own seat) 0* x - AUTO UP (operating switch of own seat) x x - AUTO DOWN (operating switch of own seat) x x - NOTE: 0: Operation permitted
x: Operation prohibited
*: Operating manual UP with AUTO UP HOLD (auto-reverse function is not activated)- SW knob indicator controlNOTE: During the initialization, if fail safe mode is activated because window position or initialization finished status is failed to be read normally from the EEPROM, SW knob indicator illuminates as shown in the diagram.
- SW knob indicator control
- If LIN communication has any abnormality (communication fail), the power window operates as follows.POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY DESCRIPTION
Power window operation IG ON Manual UP 0* Manual DOWN 0 During AUTO UP HOLD 0* AUTO UP 0* AUTO DOWN 0 POWER WINDOW REGULATOR SWITCH ASSEMBLY DESCRIPTIONPower window operation IG ON Manual UP 0* Manual DOWN 0 During AUTO UP HOLD 0* AUTO UP 0* AUTO DOWN 0 NOTE: 0: Operation permitted
x: Operation prohibited
*: With auto-reverse function enabledDoes not operate remotely.
- If LIN communication abnormality and pulse irregularity are detected simultaneously, the power window operates as follows.POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY DESCRIPTION
Power window operation Always Manual UP x Manual DOWN 0 During AUTO UP HOLD 0*1 AUTO UP x AUTO DOWN x POWER WINDOW REGULATOR SWITCH ASSEMBLY DESCRIPTIONPower window operation Always Manual UP x Manual DOWN 0 During AUTO UP HOLD 0*1 AUTO UP x AUTO DOWN x NOTE: 0: Operation permitted
x: Operation prohibited
*1: Operating manual UP with AUTO UP HOLD (auto-reverse function is not activated)Own seat's SW operation: Because LIN communication is in failure, the status of the IG signal is unknown, therefore UP operation without auto-reverse function control is prohibited.
Remote SW operation: Inoperable because LIN communication is failed.
- If LIN communication abnormality and opening direction dead band deviation or LIN communication and initial failure are detected simultaneously, the power window operates as follows.POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY DESCRIPTION
Power window operation Always Manual UP x Manual DOWN 0 During AUTO UP HOLD 0*1 AUTO UP x AUTO DOWN x NOTE: 0: Operation permitted
x: Operation prohibited
*1: Operating manual UP with AUTO UP HOLD (auto-reverse function is not activated)Remote control switch operation: Inoperable because LIN communication is failed.
- If any malfunction occurs on the pulse sensor for the auto-reverse function trigger, or any irregularity exists on window position or learned value, the following power window operations are prohibited.